---

FAST RECIPE

 

✦ Designed to quickly start making coffee in the fastest way.

✦ Ready time is approximately 1.5 minutes for a 100 ml cup.

✦ How to start:

1. First add water, then finely ground coffee, sugar to taste, do not stir.
2. Switch to Water / Coffee fast mode
3. Set parameters - temperature - 99 degrees, time - dashes (these parameters are turned on automatically when installed on the base)
4. Press the Start button.

• Then the process goes automatically:
  1. the heater turns on at 100% power
  2. when the froth rises, the coffee maker turns the heating on and off four times (as should be done when brewing coffee manually),
  3. the signal sounds for the end of cooking

 

 

 

Boiling water with automatic shutdown

This function is used when you need to quickly obtain a small amount of freshly boiled water, for example, for brewing tea or preparing water for brewing coffee through a filter. If you need water with a temperature of, for example, 95 degrees, you can wait a little after turning off until the water cools down, while the display will continuously show the temperature.

✦ Actions - switch the coffee maker to the "Water / Coffee Fast" mode, pour water and press the "Start" button - after boiling the device will turn off and beep.

Heating water to a certain temperature and immediate shutdown

✦ This mode of operation is needed if you only need to heat the water, and to a temperature below the boiling point, for example for diluting milk powder or baby food.

✦ Switch the coffee maker to the “Water / Coffee Fast” mode, set the temperature and press the “Start” button - the water will be brought to the required temperature, after which the device will turn off and beep.

Heating water to a certain temperature and maintaining for a specified time

✦ Set this operating mode if you want to heat water to a certain temperature and hold it for a specified time, for example, to brew medicinal herbs.

✦ Switch the coffee maker to the "Water" mode, set the temperature and time and press the "Start" button - the water will be brought to the required temperature, then the device will maintain it for the set time and turn off when this time is over.